EV023-S-00A 85VAC~265VAC/50Hz, 5V/2.4A Off-line Primary-side-Controller Cell Evaluation Board SOIC8

Product

EV023-S-00A 85VAC~265VAC/50Hz, 5V/2.4A Off-line Primary-side-Controller Cell Evaluation Board SOIC8

Share

pMPS EV023-S-00A — 85VAC~265VAC/50Hz, 5V/2.4A Off-line Primary-side-Controller Cell, SOIC8./p

[email protected]

MPS SOIC8 Controller Power Management Evaluation Boards

Product Details
Download

EV023-S-00A 85VAC~265VAC/50Hz, 5V/2.4A Off-line Primary-side-Controller Cell Evaluation Board SOIC8

The MPS EV023-S-00A is an evaluation board built around the MP023 for bench characterisation of the device in its intended topology. The board carries the device in its SOIC8 package.

The EV023-S-00A Evaluation Board is designed to demonstrate the capabilities of MP023.

Key Specifications

Part Number	EV023-S-00A
Board For	MP023
Board Type	Evaluation / demonstration board
Function	85VAC~265VAC/50Hz, 5V/2.4A Off-line Primary-side-Controller Cell
Package	SOIC8
Ordering Codes	EV023-S-00A

Features

Primary-Side Control without Optocoupler or Secondary Feedback Circuit
Precise Constant Current and Constant Voltage Control (CC/CV)
Variable Off-Time Peak Current Control
700V High-Voltage Current Source
20mW No-Load Power Consumption
Programmable Cable Compensation
Programmable Current Limit and Maximum Secondary Duty Cycle
Programmable FB Voltage Sensing Point
Multiple Protection Features: OVP, OCkP, OLP, OTP, VCC UVLO
Low Cost and Simple External Circuit

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.