EV1499-D-00A 5-16V, 5A Sync. Step-Down Converter Evaluation Board QFN10
EV1499-D-00A 5-16V, 5A Sync. Step-Down Converter Evaluation Board QFN10

EV1499-D-00A 5-16V, 5A Sync. Step-Down Converter Evaluation Board QFN10

Share
pMPS EV1499-D-00A — Sync. Step-Down Converter Evaluation Board, 5-16V input, 5 A output, QFN10./p
    • Product Details
    • Download

    EV1499-D-00A 5-16V, 5A Sync. Step-Down Converter Evaluation Board QFN10

    The MPS EV1499-D-00A is an evaluation board built around the MP1499 for bench characterisation of the device in its intended topology. It operates from a 5 V to 16 V input, is rated for 5 A and switches at 500 kHz. The board carries the device in its QFN10 package.

    The EV1499-D-00A demonstrates MPS's MP1499, a high-frequency, synchronous, rectified, step-down converter with built-in high- side and low-side power MOSFETs.

    Key Specifications

    Part NumberEV1499-D-00A
    Board ForMP1499
    Board TypeEvaluation / demonstration board
    FunctionSync. Step-Down Converter Evaluation Board
    Input Voltage5 V to 16 V
    Current Rating5 A
    Switching Frequency500 kHz
    PackageQFN10
    Ordering CodesEV1499-D-00A

    Features

    • Wide 5V to 16V Operating Input Range
    • 70mΩ/25mΩ Low RDS(ON) Internal Power MOSFET
    • Proprietary Switching-Loss–Reduction Technique
    • Default 500kHz Switching Frequency
    • Externally-Programmable Soft-Start
    • Sync from 200kHz to 2MHz External Clock
    • AAM Power Save Mode
    • OCP Protection and Hiccup
    • Thermal Shutdown
    • Output Adjustable from 0.8V

    Evaluation Board

    EV1499-D-00A evaluation board
    EV1499-D-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV1499-D-00A support?
    5 V to 16 V. The rated output is 5 A.
    Which package and ordering codes apply to the EV1499-D-00A?
    QFN10; order codes include EV1499-D-00A.
    What are the defining features of the EV1499-D-00A?
    Wide 5V to 16V Operating Input Range 70mΩ/25mΩ Low RDS(ON) Internal Power MOSFET

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products