EV1606-TF-00A 2.5-5.5V, 2A Synchronous Step-down Converter Evaluation Board SOT563
EV1606-TF-00A 2.5-5.5V, 2A Synchronous Step-down Converter Evaluation Board SOT563

EV1606-TF-00A 2.5-5.5V, 2A Synchronous Step-down Converter Evaluation Board SOT563

Share
pMPS EV1606-TF-00A — Synchronous Step-down Converter, 2.5-5.5V input, 2 A output, SOT563./p
    • Product Details
    • Download

    EV1606-TF-00A 2.5-5.5V, 2A Synchronous Step-down Converter Evaluation Board SOT563

    The MPS EV1606-TF-00A is an evaluation board built around the MP1606 for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 5.5 V input, is rated for 2 A and switches at 1.1 MHz. The board carries the device in its SOT563 package.

    The MP1606 is a monolithic, step-down, switch- mode converter with built-in internal power MOSFETs.

    Key Specifications

    Part NumberEV1606-TF-00A
    Board ForMP1606
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-down Converter
    Input Voltage2.5 V to 5.5 V
    Current Rating2 A
    Switching Frequency1.1 MHz
    Quiescent Current27 µA
    PackageSOT563
    Ordering CodesEV1606-TF-00A

    Features

    • Low IQ: 27μA
    • 1.1MHz Switching Frequency
    • EN for Power Sequencing
    • 1% Output Voltage Accuracy
    • Wide 2.5V-to-5.5V Operating Input Range
    • VOUT: 0.8/0.9/1.0/1.2/1.35/2.0/2.85/3.2V
    • Power Good
    • Up to 2A Output Current
    • 75mΩ and 45mΩ Internal Power MOSFET Switches
    • 100% Duty On

    Evaluation Board

    EV1606-TF-00A evaluation board
    EV1606-TF-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV1606-TF-00A support?
    2.5 V to 5.5 V. The rated output is 2 A.
    Which package and ordering codes apply to the EV1606-TF-00A?
    SOT563; order codes include EV1606-TF-00A.
    What are the defining features of the EV1606-TF-00A?
    Low IQ: 27μA 1.1MHz Switching Frequency

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message