EV1720DQ-6-00A 2.5-5.5V Mono Class D Low-EMI Audio Amplifier EV Board Evaluation Board QFN10

EV1720DQ-6-00A 2.5-5.5V Mono Class D Low-EMI Audio Amplifier EV Board Evaluation Board QFN10

The EV1720DQ-6-00A is the evaluation board for the MP1720DQ-006, a low-power mono BTL class-D audio amplifier.

Key Specifications

Features

• Pass FCC-Radiated Emissions Standards with 24inch Cable without output filter
• Maximum output into 5V VIN, 4ohm load:  1W power with 3Vpp SE input  2.7W power with differential input, 10% THD+N
• Up to 90% Efficiency
• Flexible Switching Frequency setting
• 2.5V~5.5V Operation from a Single Supply
• Low Noise (53μV Typical) with 3.3 V VIN Low Quiescent Current (4mA @3.3 V)

Evaluation Board

Design Notes

• The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
• Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
• Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
• Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

Common Questions