Welcome to our company!
EV175-S-00A MP175 Buck Regulator Evaluation Board
Share
pMPS EV175-S-00A — MP175 Buck Regulator Evaluation Board./p
- Product Details
- Download
EV175-S-00A MP175 Buck Regulator Evaluation Board
The MPS EV175-S-00A is an evaluation board built around the MP175 for bench characterisation of the device in its intended topology.
The EV175-S-00A Evaluation Board is designed to demonstrate the performance of MP175.
Key Specifications
| Part Number | EV175-S-00A |
| Board For | MP175 |
| Board Type | Evaluation / demonstration board |
| Function | MP175 Buck Regulator Evaluation Board |
| Output Power | 10 W |
| Ordering Codes | EV175-S-00A |
Features
- Primary-Side non-isolated Constant Voltage Control (CV)
- Integrated 700V MOSFET with Minimal External Components
- Peak-Current Control with Peak Current Compression
- Limited Maximum Frequency and Frequency Foldback
- Multiple Protections: SCP, OLP, OTP, open loop and VCC UVLO
- Low Cost and Simple External circuit
Evaluation Board
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What are the defining features of the EV175-S-00A?
Primary-Side non-isolated Constant Voltage Control (CV) Integrated 700V MOSFET with Minimal External Components
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
