EV1924-R-00A 16V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10

Product

EV1924-R-00A 16V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10

Share

pMPS EV1924-R-00A — Half-Bridge Gate Driver Evaluation Board, 16V input, 4 A output, QFN-10./p

[email protected]

MPS QFN-10 Power Management Evaluation Boards

Product Details
Download

EV1924-R-00A 16V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10

The MPS EV1924-R-00A is an evaluation board built around the MP1924 for bench characterisation of the device in its intended topology. It accepts up to 16 V at the input and is rated for 4 A. The board carries the device in its QFN-10 package.

The EV1924-R-00A is an evaluation board for the MP1924, a high frequency Half-Bridge gate driver.

Key Specifications

Part Number	EV1924-R-00A
Board For	MP1924
Board Type	Evaluation / demonstration board
Function	Half-Bridge Gate Driver Evaluation Board
Input Voltage	up to 16 V
Current Rating	4 A
Package	QFN-10
Ordering Codes	EV1924-R-00A

Features

118V Bootstrap Voltage Range
On-Chip Bootstrap Diode
Quiescent Current of Less than 150uA
Typical Propagation Delay of 20ns
Gate Driver Matching of Less than 5ns
UVLO for Both High-Side and Low-Side Gate Drivers
TTL Compatible Input
Available in a QFN-10 (4mmx4mm) and SOIC- 8 Package

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.