EV1924A-R-00A 15V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10
EV1924A-R-00A 15V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10

EV1924A-R-00A 15V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10

Share
pMPS EV1924A-R-00A — Half-Bridge Gate Driver Evaluation Board, 15V input, 4 A output, QFN-10./p
    • Product Details
    • Download

    EV1924A-R-00A 15V, 4A Half-Bridge Gate Driver Evaluation Board QFN-10

    The MPS EV1924A-R-00A is an evaluation board built around the MP1924A for bench characterisation of the device in its intended topology. It accepts up to 15 V at the input and is rated for 4 A. The board carries the device in its QFN-10 package.

    The EV1924A-R-00A is an evaluation board for the MP1924A, a high-frequency, half-bridge gate driver.

    Key Specifications

    Part NumberEV1924A-R-00A
    Board ForMP1924A
    Board TypeEvaluation / demonstration board
    FunctionHalf-Bridge Gate Driver Evaluation Board
    Input Voltageup to 15 V
    Current Rating4 A
    PackageQFN-10
    Ordering CodesEV1924A-R-00A

    Features

    • 115V Bootstrap Voltage Range
    • On-Chip Bootstrap Diode
    • Quiescent Current Below 150µA
    • Typical Propagation Delay of 20ns
    • Gate Driver Matching of Less than 5ns
    • UVLO for Both High-Side and Low-Side Gate Drivers
    • TTL-Compatible Input
    • Available in QFN-10 (4mmx4mm) and SOIC-8 Packages

    Evaluation Board

    EV1924A-R-00A evaluation board
    EV1924A-R-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV1924A-R-00A support?
    Up to 15 V. The rated output is 4 A.
    Which package and ordering codes apply to the EV1924A-R-00A?
    QFN-10; order codes include EV1924A-R-00A.
    What are the defining features of the EV1924A-R-00A?
    115V Bootstrap Voltage Range On-Chip Bootstrap Diode

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products