EV2148-QD-00B 2.3-5.5V, 1A Synchronous Step-down Converter Evaluation Board QFN-6
EV2148-QD-00B 2.3-5.5V, 1A Synchronous Step-down Converter Evaluation Board QFN-6

EV2148-QD-00B 2.3-5.5V, 1A Synchronous Step-down Converter Evaluation Board QFN-6

Share
pMPS EV2148-QD-00B — Synchronous Step-down Converter, 2.3-5.5V input, 1 A output, QFN-6./p
    • Product Details
    • Download

    EV2148-QD-00B 2.3-5.5V, 1A Synchronous Step-down Converter Evaluation Board QFN-6

    The MPS EV2148-QD-00B is an evaluation board built around the MP2148 for bench characterisation of the device in its intended topology. It operates from a 2.3 V to 5.5 V input, is rated for 1 A and switches at 2.2 MHz. The board carries the device in its QFN-6 package.

    The MP2148 is a monolithic, step-down, switch- mode converter with built-in internal power MOSFETs.

    Key Specifications

    Part NumberEV2148-QD-00B
    Board ForMP2148
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-down Converter
    Input Voltage2.3 V to 5.5 V
    Current Rating1 A
    Switching Frequency2.2 MHz
    PackageQFN-6
    Ordering CodesEV2148-QD-00B

    Features

    • Low IQ: 11μA
    • 2.2MHz Switching Frequency
    • EN for Power Sequencing
    • Power Good Only for Fixed Output Version
    • Wide 2.3V-to-5.5V Operating Input Range
    • Output Adjustable from 0.6V
    • Up to 1A Output Current
    • 120mΩ and 80mΩ Internal Power MOSFET Switches
    • Output Discharge
    • 100% Duty Cycle

    Evaluation Board

    EV2148-QD-00B evaluation board
    EV2148-QD-00B evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2148-QD-00B support?
    2.3 V to 5.5 V. The rated output is 1 A.
    Which package and ordering codes apply to the EV2148-QD-00B?
    QFN-6; order codes include EV2148-QD-00B.
    What are the defining features of the EV2148-QD-00B?
    Low IQ: 11μA 2.2MHz Switching Frequency

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message