EV2229-Q-00A 4.5-21V, 6A Synchronous Step-Down Converter Evaluation Board QFN-14
EV2229-Q-00A 4.5-21V, 6A Synchronous Step-Down Converter Evaluation Board QFN-14

EV2229-Q-00A 4.5-21V, 6A Synchronous Step-Down Converter Evaluation Board QFN-14

Share
pMPS EV2229-Q-00A — Synchronous Step-Down Converter Evaluation Board, 4.5-21V input, 6 A output, QFN-14./p
    • Product Details
    • Download

    EV2229-Q-00A 4.5-21V, 6A Synchronous Step-Down Converter Evaluation Board QFN-14

    The MPS EV2229-Q-00A is an evaluation board built around the MP2229 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 21 V input and is rated for 6 A. The board carries the device in its QFN-14 package.

    The EV2229-Q-00A is the evaluation board for MP2229, a high-frequency synchronous rectified step-down switch mode converter with internal power MOSFETs.

    Key Specifications

    Part NumberEV2229-Q-00A
    Board ForMP2229
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter Evaluation Board
    Input Voltage4.5 V to 21 V
    Current Rating6 A
    PackageQFN-14
    Ordering CodesEV2229-Q-00A

    Features

    • Wide 4.5V to 21V Operating Input Range
    • 6A Output Current
    • Low 40mΩ/18mΩ RDS(ON) of Internal Power MOSFETs
    • Programmable Switching Frequency
    • Frequency SYNC from 300kHz to 2MHz External Clock
    • Low Power Mode Selectable by External Signal
    • External Soft Start
    • Pre-Bias Startup
    • OCP with Hiccup Mode
    • Thermal Shutdown

    Evaluation Board

    EV2229-Q-00A evaluation board
    EV2229-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2229-Q-00A support?
    4.5 V to 21 V. The rated output is 6 A.
    Which package and ordering codes apply to the EV2229-Q-00A?
    QFN-14; order codes include EV2229-Q-00A.
    What are the defining features of the EV2229-Q-00A?
    Wide 4.5V to 21V Operating Input Range 6A Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products