EV2276-D-00A 4-16V, 8A Synchronous Step-down Converter Evaluation Board QFN-14
EV2276-D-00A 4-16V, 8A Synchronous Step-down Converter Evaluation Board QFN-14

EV2276-D-00A 4-16V, 8A Synchronous Step-down Converter Evaluation Board QFN-14

Share
pMPS EV2276-D-00A — Synchronous Step-down Converter Evaluation Board, 4-16V input, 8 A output, QFN-14./p
    • Product Details
    • Download

    EV2276-D-00A 4-16V, 8A Synchronous Step-down Converter Evaluation Board QFN-14

    The MPS EV2276-D-00A is an evaluation board built around the MP2276 for bench characterisation of the device in its intended topology. It operates from a 4 V to 16 V input, is rated for 8 A and switches at 2000 kHz. The board carries the device in its QFN-14 package.

    The EV2276-D-00A is an evaluation board for the MP2276, a high efficiency, monolithic, synchronous step-down converter.

    Key Specifications

    Part NumberEV2276-D-00A
    Board ForMP2276
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-down Converter Evaluation Board
    Input Voltage4 V to 16 V
    Current Rating8 A
    Switching Frequency2000 kHz
    PackageQFN-14
    Ordering CodesEV2276-D-00A

    Features

    • Wide 4V to 16V input Voltage Range
    • 8A Continuous Output Current
    • 24mΩ/10mΩ Low RDS(ON) Integrated Power MOSFETs
    • Adaptive COT for Ultrafast Transient Response
    • Stable with Zero-ESR Output Capacitor
    • Programmable Current Limit
    • Selectable Forced CCM or Pulse-Skip Operation at Light Load
    • Excellent Load Regulation
    • Programmable Soft Start Time from 1.7ms and up
    • Pre-Bias Start up

    Evaluation Board

    EV2276-D-00A evaluation board
    EV2276-D-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2276-D-00A support?
    4 V to 16 V. The rated output is 8 A.
    Which package and ordering codes apply to the EV2276-D-00A?
    QFN-14; order codes include EV2276-D-00A.
    What are the defining features of the EV2276-D-00A?
    Wide 4V to 16V input Voltage Range 8A Continuous Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products