EV2312-Q-00A 6-24V, 2.1A High Current Synchronous Step-down Converter Evaluation Board QFN3
EV2312-Q-00A 6-24V, 2.1A High Current Synchronous Step-down Converter Evaluation Board QFN3

EV2312-Q-00A 6-24V, 2.1A High Current Synchronous Step-down Converter Evaluation Board QFN3

Share
pMPS EV2312-Q-00A — High Current Synchronous Step-down Converter Evaluation Board, 6-24V input, 2.1 A output, QFN3./p
    • Product Details
    • Download

    EV2312-Q-00A 6-24V, 2.1A High Current Synchronous Step-down Converter Evaluation Board QFN3

    The MPS EV2312-Q-00A is an evaluation board built around the MP2312 for bench characterisation of the device in its intended topology. It operates from a 6 V to 24 V input, is rated for 2.1 A and switches at 500 kHz. The board carries the device in its QFN3 package.

    The EV2312-Q-00A is an evaluation board for the MP2312, a high efficiency monolithic synchronous step-down converter.

    Key Specifications

    Part NumberEV2312-Q-00A
    Board ForMP2312
    Board TypeEvaluation / demonstration board
    FunctionHigh Current Synchronous Step-down Converter Evaluation Board
    Input Voltage6 V to 24 V
    Current Rating2.1 A
    Switching Frequency500 kHz
    PackageQFN3
    Ordering CodesEV2312-Q-00A

    Features

    • Wide 6V to 24V Operating Input Range
    • 2.1A Continuous Output Current
    • Low RDS(ON) Internal Power MOSFETs
    • Proprietary Switching Loss Reduction Technique
    • 1% Reference Voltage
    • Internal Soft Start
    • Output Discharge
    • 500kHz Switching Frequency
    • OCP, OVP, UVP Protection and Thermal Shutdown
    • Available in a QFN3x3 package

    Evaluation Board

    EV2312-Q-00A evaluation board
    EV2312-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2312-Q-00A support?
    6 V to 24 V. The rated output is 2.1 A.
    Which package and ordering codes apply to the EV2312-Q-00A?
    QFN3; order codes include EV2312-Q-00A.
    What are the defining features of the EV2312-Q-00A?
    Wide 6V to 24V Operating Input Range 2.1A Continuous Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products