EV2313-J-00A 1A Synchronous Step-Down Converter Evaluation Board TSOT23

Product

EV2313-J-00A 1A Synchronous Step-Down Converter Evaluation Board TSOT23

Share

pMPS EV2313-J-00A — Synchronous Step-Down Converter Evaluation Board, 1 A output, TSOT23./p

[email protected]

MPS Step-Down TSOT23 Power Management Converter Evaluation Boards

Product Details
Download

EV2313-J-00A 1A Synchronous Step-Down Converter Evaluation Board TSOT23

The MPS EV2313-J-00A is an evaluation board built around the MP2313 for bench characterisation of the device in its intended topology. It is rated for 1 A and switches at 2 MHz. The board carries the device in its TSOT23 package.

The EV2313-J-00A is an evaluation board for MP2313, a high frequency, synchronous, rectified, step-down converter with built-in Power MOSFETs.

Key Specifications

Part Number	EV2313-J-00A
Board For	MP2313
Board Type	Evaluation / demonstration board
Function	Synchronous Step-Down Converter Evaluation Board
Current Rating	1 A
Switching Frequency	2 MHz
Package	TSOT23
Ordering Codes	EV2313-J-00A

Features

1A Continuous Load Current
110mΩ/50mΩ Low RDS(ON) Internal Power MOSFETs
Fixed 2MHz Switching Frequency
High Efficiency Synchronous Mode Operation
External AAM pin for Power-Save Mode Programming
Internal Soft-Start
Cycle-by-Cycle Over Current Protection
Short Circuit Protection with Hiccup Mode
Thermal Shutdown
Output Adjustable from 0.8V

Evaluation Board

Applications

Notebook System and I/O Power
Digital Set-Top Boxes

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.