EV2324-J-00A 4.5-24V, 2A Step-Down Switch Evaluation Board DESCRIPTION The EV2324-J-00A TSOT23
EV2324-J-00A 4.5-24V, 2A Step-Down Switch Evaluation Board DESCRIPTION The EV2324-J-00A TSOT23

EV2324-J-00A 4.5-24V, 2A Step-Down Switch Evaluation Board DESCRIPTION The EV2324-J-00A TSOT23

Share
pMPS EV2324-J-00A — Step-Down Switch Evaluation Board DESCRIPTION The EV2324-J-00A, 4.5-24V input, 2 A output, TSOT23./p
    • Product Details
    • Download

    EV2324-J-00A 4.5-24V, 2A Step-Down Switch Evaluation Board DESCRIPTION The EV2324-J-00A TSOT23

    The MPS EV2324-J-00A is an evaluation board built around the MP2324 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 24 V input, is rated for 2 A and switches at 500 kHz. The board carries the device in its TSOT23 package.

    The EV2324-J-00A demonstrates MPS's MP2324, a high-frequency, synchronous, rectified, step-down converter with built-in high- side and low-side power MOSFETs.

    Key Specifications

    Part NumberEV2324-J-00A
    Board ForMP2324
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Switch Evaluation Board DESCRIPTION The EV2324-J-00A
    Input Voltage4.5 V to 24 V
    Current Rating2 A
    Switching Frequency500 kHz
    PackageTSOT23
    Ordering CodesEV2324-J-00A

    Features

    • Wide 4.5V to 24V Operating Input Range
    • 120mΩ/50mΩ Low Rds(on) Internal Power MOSFETs
    • Low Quiescent Current
    • High Efficiency Synchronous Mode Operation
    • Fixed 500kHz Switching Frequency
    • Frequency Sync from 200kHz to 2MHz External Clock
    • Power Save Mode at light load
    • Internal Soft Start
    • Power Good Indicator
    • OCP Protection and Hiccup

    Evaluation Board

    EV2324-J-00A evaluation board
    EV2324-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2324-J-00A support?
    4.5 V to 24 V. The rated output is 2 A.
    Which package and ordering codes apply to the EV2324-J-00A?
    TSOT23; order codes include EV2324-J-00A.
    What are the defining features of the EV2324-J-00A?
    Wide 4.5V to 24V Operating Input Range 120mΩ/50mΩ Low Rds(on) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products