EV2341-TL-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board SOT583
EV2341-TL-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board SOT583

EV2341-TL-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board SOT583

Share
pMPS EV2341-TL-00A — Synchronous Step-Down LED Driver Evaluation Board, 8-24V input, SOT583./p
    • Product Details
    • Download

    EV2341-TL-00A 8-24V Synchronous Step-Down LED Driver Evaluation Board SOT583

    The MPS EV2341-TL-00A is an evaluation board built around the MP2341GTL for bench characterisation of the device in its intended topology. It operates from a 8 V to 24 V input and switches at 1 MHz. The board carries the device in its SOT583 package.

    The EV2341-TL-00A Evaluation Board is designed to demonstrate the capabilities of MP2341GTL.

    Key Specifications

    Part NumberEV2341-TL-00A
    Board ForMP2341GTL
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down LED Driver Evaluation Board
    Input Voltage8 V to 24 V
    Switching Frequency1 MHz
    InterfacePWM
    Peak Efficiency95%
    PackageSOT583
    Ordering CodesEV2341-TL-00A

    Features

    • 8V to 24V Wide Input Range
    • 125mΩ/75mΩ Low-RDS(ON) Internal Power MOSFETs
    • 100mV Feedback Voltage
    • Up to 95% Efficiency
    • Fixed 1MHz Switching Frequency
    • Analog Dimming by DC voltage through EN/DIM
    • Analog Dimming by PWM signal through PDIM
    • PWM Dimming by PWM signal through EN/DIM
    • 50:1 Dimming Ratio by Analog Dimming
    • 1000:1 Dimming Ratio by PWM Dimming

    Evaluation Board

    EV2341-TL-00A evaluation board
    EV2341-TL-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2341-TL-00A support?
    8 V to 24 V.
    Which package and ordering codes apply to the EV2341-TL-00A?
    SOT583; order codes include EV2341-TL-00A.
    What are the defining features of the EV2341-TL-00A?
    8V to 24V Wide Input Range 125mΩ/75mΩ Low-RDS(ON) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products