EV2370DJ-00A 4.5-24V, 1.2A Step-Down White LED Driver Evaluation Board EV2370DJ-00A Rev1.0 TSOT23
EV2370DJ-00A 4.5-24V, 1.2A Step-Down White LED Driver Evaluation Board EV2370DJ-00A Rev1.0 TSOT23

EV2370DJ-00A 4.5-24V, 1.2A Step-Down White LED Driver Evaluation Board EV2370DJ-00A Rev1.0 TSOT23

Share
pMPS EV2370DJ-00A — Step-Down White LED Driver Evaluation Board EV2370DJ-00A Rev1.0, 4.5-24V input, 1.2 A output, TSOT23./p
    • Product Details
    • Download

    EV2370DJ-00A 4.5-24V, 1.2A Step-Down White LED Driver Evaluation Board EV2370DJ-00A Rev1.0 TSOT23

    The MPS EV2370DJ-00A is an evaluation board built around the MP2370DJ for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 24 V input, is rated for 1.2 A and switches at 1.4 MHz. The board carries the device in its TSOT23 package.

    The EV2370DJ-00A is an evaluation board for the MP2370DJ, a monolithic step-down white LED driver with a built-in power MOSFET.

    Key Specifications

    Part NumberEV2370DJ-00A
    Board ForMP2370DJ
    Board TypeEvaluation / demonstration board
    FunctionStep-Down White LED Driver Evaluation Board EV2370DJ-00A Rev1.0
    Input Voltage4.5 V to 24 V
    Current Rating1.2 A
    Switching Frequency1.4 MHz
    Peak Efficiency92%
    PackageTSOT23
    Ordering CodesEV2370DJ-00A

    Features

    • Wide 4.5V to 24V Operating Input Range
    • 1.2A Peak Output Current
    • 0.35Ω Internal Power MOSFET Switch
    • Up to 92% Efficiency
    • Thermal Shutdown
    • Cycle-by-Cycle Over Current Protection
    • Available in TSOT23-6 Package
    • Fully Assembled and Tested

    Evaluation Board

    EV2370DJ-00A evaluation board
    EV2370DJ-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2370DJ-00A support?
    4.5 V to 24 V. The rated output is 1.2 A.
    Which package and ordering codes apply to the EV2370DJ-00A?
    TSOT23; order codes include EV2370DJ-00A.
    What are the defining features of the EV2370DJ-00A?
    Wide 4.5V to 24V Operating Input Range 1.2A Peak Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products