EV2499A-QB-00A 5-36V, 3A Step-Down Converter Evaluation Board QFN-13
EV2499A-QB-00A 5-36V, 3A Step-Down Converter Evaluation Board QFN-13

EV2499A-QB-00A 5-36V, 3A Step-Down Converter Evaluation Board QFN-13

Share
pMPS EV2499A-QB-00A — Step-Down Converter Evaluation Board, 5-36V input, 3 A output, QFN-13./p
    • Product Details
    • Download

    EV2499A-QB-00A 5-36V, 3A Step-Down Converter Evaluation Board QFN-13

    The MPS EV2499A-QB-00A is an evaluation board built around the MP2499A for bench characterisation of the device in its intended topology. It operates from a 5 V to 36 V input, is rated for 3 A and switches at 270 kHz. The board carries the device in its QFN-13 package.

    The EV2499A-QB-00A is an evaluation board for MP2499A, a synchronous rectified, step- down module converter with built-in power MOSFETs.

    Key Specifications

    Part NumberEV2499A-QB-00A
    Board ForMP2499A
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Converter Evaluation Board
    Input Voltage5 V to 36 V
    Current Rating3 A
    Switching Frequency270 kHz
    PackageQFN-13
    Ordering CodesEV2499A-QB-00A

    Features

    • Wide 5V to 36V Continuous Operating Input Range
    • 85mΩ/55mΩ Low RDS(ON) Internal Power MOSFETs
    • High-Efficiency Synchronous Mode Operation
    • Default 270kHz Switching Frequency
    • Synchronizes to a 200kHz to 2.4MHz External Clock
    • Internal Soft-Start
    • Output Line Drop Compensation
    • Accurate Continuous Output Current Limit with External Resistor
    • OCP Protection and Hiccup
    • Thermal Shutdown

    Evaluation Board

    EV2499A-QB-00A evaluation board
    EV2499A-QB-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2499A-QB-00A support?
    5 V to 36 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV2499A-QB-00A?
    QFN-13; order codes include EV2499A-QB-00A.
    What are the defining features of the EV2499A-QB-00A?
    Wide 5V to 36V Continuous Operating Input Range 85mΩ/55mΩ Low RDS(ON) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products