GRX Technology Co, Ltd
EV26058DQ-00A 2.8-7V, 1A Li + Linear Battery Charger With Trickle Charge Timer and LDO Mode EV Evaluation Board QFN10
EV26058DQ-00A 2.8-7V, 1A Li + Linear Battery Charger With Trickle Charge Timer and LDO Mode EV Evaluation Board QFN10

EV26058DQ-00A 2.8-7V, 1A Li + Linear Battery Charger With Trickle Charge Timer and LDO Mode EV Evaluation Board QFN10

Share
pMPS EV26058DQ-00A — Li + Linear Battery Charger With Trickle Charge Timer and LDO Mode EV, 2.8-7V input, 1 A output, QFN10./p
    [email protected]
    Previous
    EVM3515-QV-02A 4-36V 36V/1.5A Mini- Module Regulater Evaluation Board QFN-17
    MPSLDOchargerQFN10Power ManagementEvaluation Boards
    • Product Details
    • Download

    EV26058DQ-00A 2.8-7V, 1A Li + Linear Battery Charger With Trickle Charge Timer and LDO Mode EV Evaluation Board QFN10

    The MPS EV26058DQ-00A is an evaluation board built around the MP26058 for bench characterisation of the device in its intended topology. It operates from a 2.8 V to 7 V input and is rated for 1 A. The board carries the device in its QFN10 package.

    The EV26058DQ-00A is an evaluation board for the MP26058, a linear, high-performance single cell Li-Ion battery charger.

    Key Specifications

    Part NumberEV26058DQ-00A
    Board ForMP26058
    Board TypeEvaluation / demonstration board
    FunctionLi + Linear Battery Charger With Trickle Charge Timer and LDO Mode EV
    Input Voltage2.8 V to 7 V
    Current Rating1 A
    PackageQFN10
    Ordering CodesEV26058DQ-00A

    Features

    • Input Surge Up to 28V
    • Input polarity reverse protection to - 16V
    • Wide input operating range 2.8V – 7V
    • Adapter or USB Input
    • Programmable Charge Current: 100mA to 1A
    • Programmable timer
    • 7V Input Over Voltage Protection
    • Battery Temperature Monitoring
    • Automatic die temperature limiting
    • Fault and Charge Status Indicators

    Evaluation Board

    EV26058DQ-00A evaluation board
    EV26058DQ-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV26058DQ-00A support?
    2.8 V to 7 V. The rated output is 1 A.
    Which package and ordering codes apply to the EV26058DQ-00A?
    QFN10; order codes include EV26058DQ-00A.
    What are the defining features of the EV26058DQ-00A?
    Input Surge Up to 28V Input polarity reverse protection to - 16V

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products

    TOLL TMI8549 12V Low Saturation Voltage Stepper Motor Driver

    TOLL TMI8549 12V Low Saturation Voltage Stepper Motor Driver

    TOLL TMI8549 — stepper motor driver, SSOP10, 12 V.
    EV3383-F-00A Step-Up WLED Controller in a TSSOP-16EP Package Evaluation Board

    EV3383-F-00A Step-Up WLED Controller in a TSSOP-16EP Package Evaluation Board

    MPS EV3383-F-00A — Step-Up WLED Controller in a TSSOP-16EP Package Evaluation Board, TSSOP-16.
    EV7748DF-00B 9.5-36V Mono Bridge Tied Load Class D Audio Amplifier Evaluation Board TSSOP28

    EV7748DF-00B 9.5-36V Mono Bridge Tied Load Class D Audio Amplifier Evaluation Board TSSOP28

    MPS EV7748DF-00B — Mono Bridge Tied Load Class D Audio Amplifier Evaluation Board, 9.5-36V input, TSSOP28.
    EVQ70160FS-UT-00A MPSafeTM ASIL-D Evaluation Board SO26262

    EVQ70160FS-UT-00A MPSafeTM ASIL-D Evaluation Board SO26262

    MPS EVQ70160FS-UT-00A — MPSafeTM ASIL-D, SO26262, AEC-Q100.
    EVHFG610-45-MP9989A-00A USB Type-C PD Adapter Evaluation Board

    EVHFG610-45-MP9989A-00A USB Type-C PD Adapter Evaluation Board

    MPS EVHFG610-45-MP9989A-00A — USB Type-C PD Adapter Evaluation Board.
    EV5920-5048-V-00A 24-60V 60V, 15A, 7mΩ RDS(ON) Hot-Swap Intelli-Fuse Solution Evaluation Board QFN-32

    EV5920-5048-V-00A 24-60V 60V, 15A, 7mΩ RDS(ON) Hot-Swap Intelli-Fuse Solution Evaluation Board QFN-32

    MPS EV5920-5048-V-00A — 60V, 15A, 7mΩ RDS(ON) Hot-Swap Intelli-Fuse Solution, 24-60V input, 15 A output, QFN-32.
    EVKT-MP2667 USER GUIDE – MP2667 EVALUATION KIT (EVKT-MP2667) Evaluation Board

    EVKT-MP2667 USER GUIDE – MP2667 EVALUATION KIT (EVKT-MP2667) Evaluation Board

    MPS EVKT-MP2667 — USER GUIDE – MP2667 EVALUATION KIT (EVKT-MP2667).
    EV2454-Q-00A 3.3-36V, 0.6A Step Down Converter Evaluation Board QFN-10

    EV2454-Q-00A 3.3-36V, 0.6A Step Down Converter Evaluation Board QFN-10

    MPS EV2454-Q-00A — Step Down Converter Evaluation Board, 3.3-36V input, 0.6 A output, QFN-10, AEC-Q100.
    EV4431-L-00A 3.3-36V, 1A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Evaluation Board

    EV4431-L-00A 3.3-36V, 1A Low Quiescent Current Synchronous Step-Down Convertor Evaluation Evaluation Board

    MPS EV4431-L-00A — Low Quiescent Current Synchronous Step-Down Convertor Evaluation, 3.3-36V input, 1 A output.
    TOLL TMI4041E 3/4-Cell Li-ion Battery Protection IC

    TOLL TMI4041E 3/4-Cell Li-ion Battery Protection IC

    TOLL TMI4041E — li-ion battery protection ic (3-4 cells), TSSOP16, 3 V.