EV26121DQ-00A 7V 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10
EV26121DQ-00A 7V 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10

EV26121DQ-00A 7V 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10

Share
pMPS EV26121DQ-00A — 28V 1A Linear Li-Ion Battery Charger Evaluation Board, 7V input, 1 A output, QFN10./p
    • Product Details
    • Download

    EV26121DQ-00A 7V 28V 1A Linear Li-Ion Battery Charger Evaluation Board QFN10

    The MPS EV26121DQ-00A is an evaluation board built around the MP26121 for bench characterisation of the device in its intended topology. It accepts up to 7 V at the input and is rated for 1 A. The board carries the device in its QFN10 package.

    The EV26121DQ-00A is an evaluation board for the MP26121, a linear, high-performance single cell Li-Ion battery charger.

    Key Specifications

    Part NumberEV26121DQ-00A
    Board ForMP26121
    Board TypeEvaluation / demonstration board
    Function28V 1A Linear Li-Ion Battery Charger Evaluation Board
    Input Voltageup to 7 V
    Current Rating1 A
    PackageQFN10
    Ordering CodesEV26121DQ-00A

    Features

    • Input Surge Protection up to 28V
    • Programmable Charge Current:200mA to 1A
    • Trickle Charge
    • 40uA shutdown current
    • 0.75% VBATT Accuracy
    • 7V Input OVP
    • Auto Recharge
    • Thermal Protection
    • Fault and Charge Status Indicator
    • Fully Assembled and Tested

    Evaluation Board

    EV26121DQ-00A evaluation board
    EV26121DQ-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV26121DQ-00A support?
    Up to 7 V. The rated output is 1 A.
    Which package and ordering codes apply to the EV26121DQ-00A?
    QFN10; order codes include EV26121DQ-00A.
    What are the defining features of the EV26121DQ-00A?
    Input Surge Protection up to 28V Programmable Charge Current:200mA to 1A

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products