EV2695-Q-01A 4-11V I2C Controlled Single Cell Switching Charger Evaluation Board

Product

EV2695-Q-01A 4-11V I2C Controlled Single Cell Switching Charger Evaluation Board

Share

pMPS EV2695-Q-01A — I2C Controlled Single Cell Switching Charger, 4-11V input./p

[email protected]

MPS charger LED Power Management Evaluation Boards

Product Details
Download

EV2695-Q-01A 4-11V I2C Controlled Single Cell Switching Charger Evaluation Board

The MPS EV2695-Q-01A is an evaluation board built around the MP2695 for bench characterisation of the device in its intended topology. It operates from a 4 V to 11 V input and handles 1s battery stacks.

The EV2695-Q-01A is an evaluation board for the MP2695, a high-integrated, flexible switch- mode battery charger.

Key Specifications

Part Number	EV2695-Q-01A
Board For	MP2695
Board Type	Evaluation / demonstration board
Function	I2C Controlled Single Cell Switching Charger
Input Voltage	4 V to 11 V
Battery Cells	1s
Interface	I²C
Ordering Codes	EV2695-Q-01A

Features

4.0V to 11V Operation Voltage Range
Up to 16V Sustainable Input Voltage
500mA to 3.6A Programmable Charge Current
3.6V to 4.45V Programmable Charge Regulation Voltage
100mA to 3A Programmable Input Current Limit
Minimum Input Voltage Loop for Maximum Adapter Power Tracking
Comprehensive Safety Features
Fully-customizable JEITA Profile
Charge Safety Timer
Input Over-voltage Protection

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.