EV28160-C-00A 2.5-5.5V, 500mA 5.5V/0.5A High-Efficiency Integrated Buck-Boost Converter Evaluation Board

Product

EV28160-C-00A 2.5-5.5V, 500mA 5.5V/0.5A High-Efficiency Integrated Buck-Boost Converter Evaluation Board

Share

pMPS EV28160-C-00A — 5.5V/0.5A High-Efficiency Integrated Buck-Boost Converter, 2.5-5.5V input, 500 mA output./p

[email protected]

MPS Boost Power Management Buck Buck-Boost Converter Evaluation Boards

Product Details
Download

EV28160-C-00A 2.5-5.5V, 500mA 5.5V/0.5A High-Efficiency Integrated Buck-Boost Converter Evaluation Board

The MPS EV28160-C-00A is an evaluation board built around the MP28160 for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 5.5 V input, is rated for 500 mA and switches at 1.8 MHz.

The EV28160-C-00A is an evaluation board for MP28160, which is an integrated Buck-Boost converter in small CSP package.

Key Specifications

Part Number	EV28160-C-00A
Board For	MP28160
Board Type	Evaluation / demonstration board
Function	5.5V/0.5A High-Efficiency Integrated Buck-Boost Converter
Input Voltage	2.5 V to 5.5 V
Current Rating	500 mA
Switching Frequency	1.8 MHz
Interface	PWM
Ordering Codes	EV28160-C-00A

Features

2.5V to 5.5V Input-Voltage Range
1.8MHz Switching Frequency for CCM
3.3V Fixed Output Voltage
500mA Continuous Output Current
1ms Soft-start Time
Auto PFM/PWM Mode
Output over Voltage Protection
Hiccup over Current Protection
1µA Shutdown Current
Active Low System EN pin

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.