EV28163-Q-00A 2-5.5V High Efficiency Single Inductor Buck-Boost DC-DC Converter Evaluation Evaluation Board QFN10
EV28163-Q-00A 2-5.5V High Efficiency Single Inductor Buck-Boost DC-DC Converter Evaluation Evaluation Board QFN10

EV28163-Q-00A 2-5.5V High Efficiency Single Inductor Buck-Boost DC-DC Converter Evaluation Evaluation Board QFN10

Share
pMPS EV28163-Q-00A — High Efficiency Single Inductor Buck-Boost DC-DC Converter Evaluation, 2-5.5V input, QFN10./p
    • Product Details
    • Download

    EV28163-Q-00A 2-5.5V High Efficiency Single Inductor Buck-Boost DC-DC Converter Evaluation Evaluation Board QFN10

    The MPS EV28163-Q-00A is an evaluation board built around the MP28163 for bench characterisation of the device in its intended topology. It operates from a 2 V to 5.5 V input and switches at 1 MHz. The board carries the device in its QFN10 package.

    The EV28163-Q-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP28163.

    Key Specifications

    Part NumberEV28163-Q-00A
    Board ForMP28163
    Board TypeEvaluation / demonstration board
    FunctionHigh Efficiency Single Inductor Buck-Boost DC-DC Converter Evaluation
    Input Voltage2 V to 5.5 V
    Switching Frequency1 MHz
    Quiescent Current80 µA
    Peak Efficiency95%
    PackageQFN10
    Ordering CodesEV28163-Q-00A

    Features

    • High efficiency up to 95%.
    • Load disconnect during shutdown
    • Input voltage range: 2V to 5.5V
    • adjustable output voltage from 1.5V to 5V
    • 1MHz switching frequency
    • Pulse skipping mode at light load
    • Typical 80uA quiescent current
    • Internal loop compensation for fast response
    • Internal soft start
    • OTP, hiccup SCP

    Evaluation Board

    EV28163-Q-00A evaluation board
    EV28163-Q-00A evaluation board, as published by MPS.

    Applications

    • Battery-powered products

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV28163-Q-00A support?
    2 V to 5.5 V.
    Which package and ordering codes apply to the EV28163-Q-00A?
    QFN10; order codes include EV28163-Q-00A.
    What are the defining features of the EV28163-Q-00A?
    High efficiency up to 95%. Load disconnect during shutdown

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products