EV28310-C-00A 2-5.5V, 300mA Ultra-Low IQ Step-Down Regulator Evaluation Board
EV28310-C-00A 2-5.5V, 300mA Ultra-Low IQ Step-Down Regulator Evaluation Board

EV28310-C-00A 2-5.5V, 300mA Ultra-Low IQ Step-Down Regulator Evaluation Board

Share
pMPS EV28310-C-00A — Ultra-Low IQ Step-Down Regulator, 2-5.5V input, 300 mA output./p
    • Product Details
    • Download

    EV28310-C-00A 2-5.5V, 300mA Ultra-Low IQ Step-Down Regulator Evaluation Board

    The MPS EV28310-C-00A is an evaluation board built around the MP28310 for bench characterisation of the device in its intended topology. It operates from a 2 V to 5.5 V input, is rated for 300 mA and switches at 1.5 MHz.

    The EV28310-C-00A is an evaluation board designed to demonstrate the capabilities of the MP28310, a monolithic power management unit containing a 300mA, high-efficiency, step-down switching converter and a 100mA LDO regulator.

    Key Specifications

    Part NumberEV28310-C-00A
    Board ForMP28310
    Board TypeEvaluation / demonstration board
    FunctionUltra-Low IQ Step-Down Regulator
    Input Voltage2 V to 5.5 V
    Current Rating300 mA
    Switching Frequency1.5 MHz
    Ordering CodesEV28310-C-00A

    Features

    • 300mA Buck Switcher:
    • Ultra-Low 500nA IQ
    • Wide 2.0V to 5.5V Operating Input Range
    • 7 Selectable Output Voltages
    • Up to 300mA Output Current
    • 1.5MHz Switching Frequency during CCM
    • 100% Duty Cycle in Dropout Mode
    • 0.25Ω and 0.25Ω Internal Power MOSFET Switches
    • Cycle-by-Cycle Over-Current Protection
    • Short-Circuit Protection with Hiccup Mode 100mA LDO:

    Evaluation Board

    EV28310-C-00A evaluation board
    EV28310-C-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV28310-C-00A support?
    2 V to 5.5 V. The rated output is 300 mA.
    What are the defining features of the EV28310-C-00A?
    300mA Buck Switcher: Ultra-Low 500nA IQ

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products