EV2905-K-01A 10.8-13.2V, 10A Hysteretic Synchronous Step-Down Controller Evaluation Board SO-8
EV2905-K-01A 10.8-13.2V, 10A Hysteretic Synchronous Step-Down Controller Evaluation Board SO-8

EV2905-K-01A 10.8-13.2V, 10A Hysteretic Synchronous Step-Down Controller Evaluation Board SO-8

Share
pMPS EV2905-K-01A — Hysteretic Synchronous Step-Down Controller Evaluation Board, 10.8-13.2V input, 10 A output, SO-8./p
    • Product Details
    • Download

    EV2905-K-01A 10.8-13.2V, 10A Hysteretic Synchronous Step-Down Controller Evaluation Board SO-8

    The MPS EV2905-K-01A is an evaluation board built around the MP2905AEK for bench characterisation of the device in its intended topology. It operates from a 10.8 V to 13.2 V input, is rated for 10 A and switches at 300 kHz. The board carries the device in its SO-8 package.

    The EV2905A-K-01A is the evaluation board for the MP2905AEK, a hysteretic synchronous step-down controller.

    Key Specifications

    Part NumberEV2905-K-01A
    Board ForMP2905AEK
    Board TypeEvaluation / demonstration board
    FunctionHysteretic Synchronous Step-Down Controller Evaluation Board
    Input Voltage10.8 V to 13.2 V
    Current Rating10 A
    Switching Frequency300 kHz
    Peak Efficiency90%
    PackageSO-8
    Ordering CodesEV2905-K-01A

    Features

    • 10A Output Current,1.2V Output Voltage
    • Programmable Soft-Start
    • Hiccup Current Limit and Thermal Shutdown
    • Monotonic Startup into Prebias Output
    • Startup Overvoltage Protection
    • Enable/Shutdown

    Evaluation Board

    EV2905-K-01A evaluation board
    EV2905-K-01A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV2905-K-01A support?
    10.8 V to 13.2 V. The rated output is 10 A.
    Which package and ordering codes apply to the EV2905-K-01A?
    SO-8; order codes include EV2905-K-01A.
    What are the defining features of the EV2905-K-01A?
    10A Output Current,1.2V Output Voltage Programmable Soft-Start

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message