EV2910ES-00A 5-20V, 10A 5V/12V Synchronous Buck PWM DC/DC and Linear Power Controller EV Board Evaluation Board SO-8

Product

EV2910ES-00A 5-20V, 10A 5V/12V Synchronous Buck PWM DC/DC and Linear Power Controller EV Board Evaluation Board SO-8

Share

pMPS EV2910ES-00A — 5V/12V Synchronous Buck PWM DC/DC and Linear Power Controller EV Board, 5-20V input, 10 A output, SO-8./p

[email protected]

MPS Controller Power Management Buck Evaluation Boards SO-8

Product Details
Download

EV2910ES-00A 5-20V, 10A 5V/12V Synchronous Buck PWM DC/DC and Linear Power Controller EV Board Evaluation Board SO-8

The MPS EV2910ES-00A is an evaluation board built around the MP2910ES for bench characterisation of the device in its intended topology. It operates from a 5 V to 20 V input, is rated for 10 A and switches at 300 KHz. The board carries the device in its SO-8 package.

The EV2910ES-00A is an evaluation board for the MP2910ES that is a dual output with one synchronous buck PWM and one linear controller.

Key Specifications

Part Number	EV2910ES-00A
Board For	MP2910ES
Board Type	Evaluation / demonstration board
Function	5V/12V Synchronous Buck PWM DC/DC and Linear Power Controller EV Board
Input Voltage	5 V to 20 V
Current Rating	10 A
Switching Frequency	300 KHz
Interface	PWM
Package	SO-8
Ordering Codes	EV2910ES-00A

Features

5V or 12V VCC Supply Voltage
Wide 5V to 20V Operating Input Range
10A Output Current
Fixed 300KHz Frequency
Internal Soft-Start
Output Adjustable from 0.8V to 0.9xVIN

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.