EV3212DQ-00A 2.3-5.5V, 1.3A Micropower Step-Up Converter Evaluation Board QFN10
EV3212DQ-00A 2.3-5.5V, 1.3A Micropower Step-Up Converter Evaluation Board QFN10

EV3212DQ-00A 2.3-5.5V, 1.3A Micropower Step-Up Converter Evaluation Board QFN10

Share
pMPS EV3212DQ-00A — Micropower Step-Up Converter, 2.3-5.5V input, 1.3 A output, QFN10./p
    • Product Details
    • Download

    EV3212DQ-00A 2.3-5.5V, 1.3A Micropower Step-Up Converter Evaluation Board QFN10

    The MPS EV3212DQ-00A is an evaluation board built around the MP3212 for bench characterisation of the device in its intended topology. It operates from a 2.3 V to 5.5 V input, is rated for 1.3 A and switches at 1 MHz. The board carries the device in its QFN10 package.

    The EV3212DQ-00A is the evaluation board of MP3212, a constant frequency, 10-pin QFN current mode step-up converter intended for small, low power applications.

    Key Specifications

    Part NumberEV3212DQ-00A
    Board ForMP3212
    Board TypeEvaluation / demonstration board
    FunctionMicropower Step-Up Converter
    Input Voltage2.3 V to 5.5 V
    Current Rating1.3 A
    Switching Frequency1 MHz
    Quiescent Current180 µA
    Peak Efficiency85%
    PackageQFN10
    Ordering CodesEV3212DQ-00A

    Features

    • 180µA Quiescent Current
    • 2.3V to 5.5V Input Voltage
    • 1MHz Fixed Switching Frequency
    • 1.3A Switch Current Limit
    • Input-output disconnect
    • Up to 28V Output Voltage
    • Automatic Pulse Frequency Modulation Mode at Light Loads
    • Over 85% Efficiency
    • Available in a 10-Pin QFN Package

    Evaluation Board

    EV3212DQ-00A evaluation board
    EV3212DQ-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV3212DQ-00A support?
    2.3 V to 5.5 V. The rated output is 1.3 A.
    Which package and ordering codes apply to the EV3212DQ-00A?
    QFN10; order codes include EV3212DQ-00A.
    What are the defining features of the EV3212DQ-00A?
    180µA Quiescent Current 2.3V to 5.5V Input Voltage

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products