EV3310EQ-00A 5-25V, 1.3A Step-up White LED Driver Evaluation Board QFN10

Product

EV3310EQ-00A 5-25V, 1.3A Step-up White LED Driver Evaluation Board QFN10

Share

pMPS EV3310EQ-00A — Step-up White LED Driver Evaluation Board, 5-25V input, 1.3 A output, QFN10./p

[email protected]

MPS QFN10 LED Power Management Evaluation Boards Step-Up

Product Details
Download

EV3310EQ-00A 5-25V, 1.3A Step-up White LED Driver Evaluation Board QFN10

The MPS EV3310EQ-00A is an evaluation board built around the MP3310 for bench characterisation of the device in its intended topology. It operates from a 5 V to 25 V input and is rated for 1.3 A. The board carries the device in its QFN10 package.

The EV3310EQ-00A is an evaluation board for the MP3310, a monolithic step-up converter designed for driving arrays of WLEDs from a wide input supply range.

Key Specifications

Part Number	EV3310EQ-00A
Board For	MP3310
Board Type	Evaluation / demonstration board
Function	Step-up White LED Driver Evaluation Board
Input Voltage	5 V to 25 V
Current Rating	1.3 A
Interface	PWM
Peak Efficiency	93%
Package	QFN10
Ordering Codes	EV3310EQ-00A

Features

Wide 5V to 25V Operating Input Range
Drives up to 12 Series White LEDs
Up to 93% Efficiency
True PWM Dimming
Adjustable Switching Frequency
Adjustable Open Load Shutdown Voltage
Fully Assembled and Tested

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.