EV3412EJ-00A 0.8-4.4V, 1.1A Synchronous Boost White LED Driver Evaluation Board SOT23
EV3412EJ-00A 0.8-4.4V, 1.1A Synchronous Boost White LED Driver Evaluation Board SOT23

EV3412EJ-00A 0.8-4.4V, 1.1A Synchronous Boost White LED Driver Evaluation Board SOT23

Share
pMPS EV3412EJ-00A — Synchronous Boost White LED Driver Evaluation Board, 0.8-4.4V input, 1.1 A output, SOT23./p
    • Product Details
    • Download

    EV3412EJ-00A 0.8-4.4V, 1.1A Synchronous Boost White LED Driver Evaluation Board SOT23

    The MPS EV3412EJ-00A is an evaluation board built around the MP3412 for bench characterisation of the device in its intended topology. It operates from a 0.8 V to 4.4 V input, is rated for 1.1 A and switches at 1 MHz. The board carries the device in its SOT23 package.

    The EV3412EJ-00A is an evaluation board for the MP3412, a synchronous step-up WLED driver with true output load disconnection function.

    Key Specifications

    Part NumberEV3412EJ-00A
    Board ForMP3412
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Boost White LED Driver Evaluation Board
    Input Voltage0.8 V to 4.4 V
    Current Rating1.1 A
    Switching Frequency1 MHz
    InterfacePWM
    Peak Efficiency96%
    PackageSOT23
    Ordering CodesEV3412EJ-00A

    Features

    • Input Range: 0.8V to 4.4V
    • 0.8V Low Start-Up Voltage
    • Internal Power MOSFET and Synchronous Rectifier
    • 1MHz Fixed Switching Frequency
    • Up to 96% Efficiency
    • True Output Load Disconnect
    • Open-Load Protection
    • Short-Circuit Protection
    • Fully Assembled and Tested

    Evaluation Board

    EV3412EJ-00A evaluation board
    EV3412EJ-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV3412EJ-00A support?
    0.8 V to 4.4 V. The rated output is 1.1 A.
    Which package and ordering codes apply to the EV3412EJ-00A?
    SOT23; order codes include EV3412EJ-00A.
    What are the defining features of the EV3412EJ-00A?
    Input Range: 0.8V to 4.4V 0.8V Low Start-Up Voltage

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products