EV3415-G-00A 2.8-4.5V, 3.6A Synchronous Step-up Converter Evaluation Board QFN12
EV3415-G-00A 2.8-4.5V, 3.6A Synchronous Step-up Converter Evaluation Board QFN12

EV3415-G-00A 2.8-4.5V, 3.6A Synchronous Step-up Converter Evaluation Board QFN12

Share
pMPS EV3415-G-00A — Synchronous Step-up Converter, 2.8-4.5V input, 3.6 A output, QFN12./p
    • Product Details
    • Download

    EV3415-G-00A 2.8-4.5V, 3.6A Synchronous Step-up Converter Evaluation Board QFN12

    The MPS EV3415-G-00A is an evaluation board built around the MP3415 for bench characterisation of the device in its intended topology. It operates from a 2.8 V to 4.5 V input, is rated for 3.6 A and switches at 1 MHz. The board carries the device in its QFN12 package.

    EV3415-G-00A Evaluation Board is designed to demonstrate the capability of MP3415.

    Key Specifications

    Part NumberEV3415-G-00A
    Board ForMP3415
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-up Converter
    Input Voltage2.8 V to 4.5 V
    Current Rating3.6 A
    Switching Frequency1 MHz
    Quiescent Current22 µA
    Peak Efficiency97%
    PackageQFN12
    Ordering CodesEV3415-G-00A

    Features

    • 1.8V to 4.5V Board Input
    • Program up to 5.5V Output Voltage
    • Internal Synchronous Rectifier
    • 1MHz Fixed Frequency Switching
    • 22μA Quiescent Current
    • <1μA Shutdown Current
    • True Output Disconnect from Input
    • Up to 97% Efficiency
    • High Efficiency over Full-Load Range
    • Internal Compensation, Inrush Current Limiting, and Internal Soft-Start

    Evaluation Board

    EV3415-G-00A evaluation board
    EV3415-G-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV3415-G-00A support?
    2.8 V to 4.5 V. The rated output is 3.6 A.
    Which package and ordering codes apply to the EV3415-G-00A?
    QFN12; order codes include EV3415-G-00A.
    What are the defining features of the EV3415-G-00A?
    1.8V to 4.5V Board Input Program up to 5.5V Output Voltage

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products