EV3418-J-00A 0.6-4V, 400mA Sychronous Boost Converter Evaluation Board SOT23
EV3418-J-00A 0.6-4V, 400mA Sychronous Boost Converter Evaluation Board SOT23

EV3418-J-00A 0.6-4V, 400mA Sychronous Boost Converter Evaluation Board SOT23

Share
pMPS EV3418-J-00A — Sychronous Boost Converter Evaluation Board, 0.6-4V input, 400 mA output, SOT23./p
    • Product Details
    • Download

    EV3418-J-00A 0.6-4V, 400mA Sychronous Boost Converter Evaluation Board SOT23

    The MPS EV3418-J-00A is an evaluation board built around the MP3418 for bench characterisation of the device in its intended topology. It operates from a 0.6 V to 4 V input, is rated for 400 mA and switches at 1.2 MHz. The board carries the device in its SOT23 package.

    The EV3418-J-00A Evaluation Board is designed to demonstrate the capabilities of MPS' MP3418.

    Key Specifications

    Part NumberEV3418-J-00A
    Board ForMP3418
    Board TypeEvaluation / demonstration board
    FunctionSychronous Boost Converter Evaluation Board
    Input Voltage0.6 V to 4 V
    Current Rating400 mA
    Switching Frequency1.2 MHz
    Quiescent Current38 µA
    Peak Efficiency96%
    PackageSOT23
    Ordering CodesEV3418-J-00A

    Features

    • Up to 96% Efficiency
    • 0.8V Low Voltage Start-Up, 0.6V-to-4V Input Range
    • 1.8V-to-4V Output Range
    • Internal Synchronous Rectifier
    • Typical 38μA Quiescent Current
    • Typical 0.1μA Shutdown Current
    • True Output Disconnect from Input
    • VIN>VOUT Down Mode Operation
    • High Efficiency under Light-Load Conditions
    • Very Small External Components

    Evaluation Board

    EV3418-J-00A evaluation board
    EV3418-J-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV3418-J-00A support?
    0.6 V to 4 V. The rated output is 400 mA.
    Which package and ordering codes apply to the EV3418-J-00A?
    SOT23; order codes include EV3418-J-00A.
    What are the defining features of the EV3418-J-00A?
    Up to 96% Efficiency 0.8V Low Voltage Start-Up, 0.6V-to-4V Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products