EV3910-K-00B 5-35V Peak Current Mode PWM Controller Boost Evaluation Board MSOP-10

Product

EV3910-K-00B 5-35V Peak Current Mode PWM Controller Boost Evaluation Board MSOP-10

Share

pMPS EV3910-K-00B — Peak Current Mode PWM Controller Boost Evaluation Board, 5-35V input, MSOP-10./p

[email protected]

MPS MSOP-10 Boost Controller Power Management Evaluation Boards

Product Details
Download

EV3910-K-00B 5-35V Peak Current Mode PWM Controller Boost Evaluation Board MSOP-10

The MPS EV3910-K-00B is an evaluation board built around the MP3910 for bench characterisation of the device in its intended topology. It operates from a 5 V to 35 V input. The board carries the device in its MSOP-10 package.

The EV3910-K-00B evaluation board is designed to demonstrate the capabilities of the MP3910, a peak current mode PWM controller that can drive an external MOSFET capable of handling over 10A of current.

Key Specifications

Part Number	EV3910-K-00B
Board For	MP3910
Board Type	Evaluation / demonstration board
Function	Peak Current Mode PWM Controller Boost Evaluation Board
Input Voltage	5 V to 35 V
Interface	PWM
Package	MSOP-10
Ordering Codes	EV3910-K-00B

Features

Wide 5V to 35V Supply Voltage Range
1A, 12V MOSFET Gate Driver
External Soft-Start
Pulse-Skip Operation under Light Loads
Configurable Switching Frequency (30kHz to 400kHz)
Synchronizable from 80kHz to 400kHz
Cycle-by-Cycle Current Limit
Over-Voltage Protection (OVP)
Available in an MSOP-10 Package

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.