EV4060-K-00A 198VAC~265VAC/50Hz, 72V/125mA Non-isolated Evaluation Board

EV4060-K-00A 198VAC~265VAC/50Hz, 72V/125mA Non-isolated Evaluation Board

The EV4060-K-00A Evaluation Board is designed to demonstrate the capabilities of MP4060.

Key Specifications

Features

• Adaptive Dimmer Type Detection and Phase-Cut-Based Dimming Control
• Active Bleeder Control Circuit Integrated
• Good Dimmer Compatibility and Deep Dimming Range
• Fast Start-Up without Perceptible Delay
• Integrated Thermal Current Foldback to Prolong the LED Lifetime
• Accurate Line & Load Regulation
• High Power Factor
• Operates in Boundary Conduction Mode
• Cycle-by-Cycle Current Limit
• Winding Short-Circuit Protection

Evaluation Board

Design Notes

• The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
• Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
• Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
• Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

Common Questions