EV4255-VE-00A 4-36V, 3A Dual-Channel Buck Converter Evaluation Board QFN-21
EV4255-VE-00A 4-36V, 3A Dual-Channel Buck Converter Evaluation Board QFN-21

EV4255-VE-00A 4-36V, 3A Dual-Channel Buck Converter Evaluation Board QFN-21

Share
pMPS EV4255-VE-00A — Dual-Channel Buck Converter, 4-36V input, 3 A output, QFN-21./p
    • Product Details
    • Download

    EV4255-VE-00A 4-36V, 3A Dual-Channel Buck Converter Evaluation Board QFN-21

    The MPS EV4255-VE-00A is an evaluation board built around the MP4255 for bench characterisation of the device in its intended topology. It operates from a 4 V to 36 V input and is rated for 3 A. The board carries the device in its QFN-21 package.

    The EV4255-VE-00A is an evaluation board designed to demonstrate the capabilities of the MP4255, a dual-channel, monolithic, step-down converter with an I2C interface.

    Key Specifications

    Part NumberEV4255-VE-00A
    Board ForMP4255
    Board TypeEvaluation / demonstration board
    FunctionDual-Channel Buck Converter
    Input Voltage4 V to 36 V
    Current Rating3 A
    InterfaceI²C
    PackageQFN-21
    Ordering CodesEV4255-VE-00A

    Features

    • Dual-Channel 3A or Shared 6A Output Current
    • Wide 4V to 36V Input Voltage Range
    • 1V to 36V Output Voltage Range with 12.6mV Resolution, VOUT Scale Loop = 0.0635
    • 250kHz, 420kHz, 1.1MHz, or 2.1MHz Configurable Switching Frequency
    • Frequency Spread Spectrum
    • Low-Dropout Mode
    • Line Drop Compensation
    • Configurable Constant Current (CC) Output Current Limiting, 50mA/Step via the I2C
    • Short-Circuit Protection (SCP)
    • Internal, Low RDS(ON) 22mΩ High-Side MOSFET (HS-FET) and 26mΩ Low-Side MOSFET (LS-FET)

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV4255-VE-00A support?
    4 V to 36 V. The rated output is 3 A.
    Which package and ordering codes apply to the EV4255-VE-00A?
    QFN-21; order codes include EV4255-VE-00A.
    What are the defining features of the EV4255-VE-00A?
    Dual-Channel 3A or Shared 6A Output Current Wide 4V to 36V Input Voltage Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products