EV4415M-QB-00A 4-36V, 1.5A Synchronous Step Down Convertor Evaluation Board QFN-13

Product

EV4415M-QB-00A 4-36V, 1.5A Synchronous Step Down Convertor Evaluation Board QFN-13

Share

pMPS EV4415M-QB-00A — Synchronous Step Down Convertor Evaluation Board, 4-36V input, 1.5 A output, QFN-13./p

[email protected]

MPS QFN-13 Power Management Evaluation Boards

Product Details
Download

EV4415M-QB-00A 4-36V, 1.5A Synchronous Step Down Convertor Evaluation Board QFN-13

The MPS EV4415M-QB-00A is an evaluation board built around the MPQ4415MGQB for bench characterisation of the device in its intended topology. It operates from a 4 V to 36 V input, is rated for 1.5 A and switches at 2.2 MHz. The board carries the device in its QFN-13 package.

The EV4415M-QB-00A is an evaluation board for the MP/MPQ4415MGQB.

Key Specifications

Part Number	EV4415M-QB-00A
Board For	MPQ4415MGQB
Board Type	Evaluation / demonstration board
Function	Synchronous Step Down Convertor Evaluation Board
Input Voltage	4 V to 36 V
Current Rating	1.5 A
Switching Frequency	2.2 MHz
Package	QFN-13
Ordering Codes	EV4415M-QB-00A

Features

Wide 4V to 36V Operating Input Range
1.5A Continuous Load Current
90mΩ High-Side, 50mΩ Low-Side Internal Power MOSFETs
High-Efficiency Synchronous Mode Operation
Default 2.2MHz Switching Frequency
450kHz to 2.2MHz Frequency Sync
Forced Continuous Conduction Mode (CCM)
Internal Soft Start (SS)
Power Good (PG) Indicator
Over-Current Protection (OCP) with Valley- Current Detection and Hiccup

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.