EV4541-N-00A 8-80V, 0.8A Synchronous Buck Converter Evaluation Board SOIC
EV4541-N-00A 8-80V, 0.8A Synchronous Buck Converter Evaluation Board SOIC

EV4541-N-00A 8-80V, 0.8A Synchronous Buck Converter Evaluation Board SOIC

Share
pMPS EV4541-N-00A — Synchronous Buck Converter Evaluation Board, 8-80V input, 0.8 A output, SOIC./p
    • Product Details
    • Download

    EV4541-N-00A 8-80V, 0.8A Synchronous Buck Converter Evaluation Board SOIC

    The MPS EV4541-N-00A is an evaluation board built around the MP4541 for bench characterisation of the device in its intended topology. It operates from a 8 V to 80 V input, is rated for 0.8 A and switches at 1 MHz. The board carries the device in its SOIC package.

    The EV4541-N-00A is an evaluation board designed to demonstrate the capabilities of MPS's MP4541, a high-efficiency, synchronous step-down converter with integrated high-side and low-side MOSFETs.

    Key Specifications

    Part NumberEV4541-N-00A
    Board ForMP4541
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Buck Converter Evaluation Board
    Input Voltage8 V to 80 V
    Current Rating0.8 A
    Switching Frequency1 MHz
    PackageSOIC
    Ordering CodesEV4541-N-00A

    Features

    • 8V to 80V Input Voltage
    • 1V to 30V Output Voltage
    • 90% Maximum Operation Duty Cycle
    • 625mΩ/380mΩ Internal MSOFETs
    • Constant-On-Time Control Mode
    • Configurable 100kHz to 1MHz Frequency
    • Internal Soft Start and Loop Compensation
    • Over-Current Protection (OCP) and Short- Circuit Protection (SCP) with Hiccup Mode
    • High-Efficiency PSM at Light-Load
    • Available in an SOIC-8EP Package

    Evaluation Board

    EV4541-N-00A evaluation board
    EV4541-N-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV4541-N-00A support?
    8 V to 80 V. The rated output is 0.8 A.
    Which package and ordering codes apply to the EV4541-N-00A?
    SOIC; order codes include EV4541-N-00A.
    What are the defining features of the EV4541-N-00A?
    8V to 80V Input Voltage 1V to 30V Output Voltage

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message