Welcome to our company!
EV5073-G-00B 0.5-5.5V, 2A Programmable Current Low RDSON Load Switch Evaluation Board
Share
pMPS EV5073-G-00B — Programmable Current Low RDSON Load Switch, 0.5-5.5V input, 2 A output./p
- Product Details
- Download
EV5073-G-00B 0.5-5.5V, 2A Programmable Current Low RDSON Load Switch Evaluation Board
The MPS EV5073-G-00B is an evaluation board built around the MP5073 for bench characterisation of the device in its intended topology. It operates from a 0.5 V to 5.5 V input and is rated for 2 A.
The EV5073-G-00B is an evaluation board for the MP5073, a low RDSON load switch with current limit.
Key Specifications
| Part Number | EV5073-G-00B |
| Board For | MP5073 |
| Board Type | Evaluation / demonstration board |
| Function | Programmable Current Low RDSON Load Switch |
| Input Voltage | 0.5 V to 5.5 V |
| Current Rating | 2 A |
| Ordering Codes | EV5073-G-00B |
Features
- Integrated 50mΩ Low RDSON FETs
- Adjustable Start Up Slew Rate
- Wide VIN Range from 0.5V to 5.5V
- <1uA Shutdown Current
- Programmable 2.5A Current Limit Range
- Power Good Indicator
- Output Discharge function
- Enable Pin
- <200ns Short-Circuit Protection Response Time
- Thermal Protection
Evaluation Board
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EV5073-G-00B support?
0.5 V to 5.5 V. The rated output is 2 A.
What are the defining features of the EV5073-G-00B?
Integrated 50mΩ Low RDSON FETs Adjustable Start Up Slew Rate
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
