EV5087-G-00B 0.5-5.5V, 7A Low RDSON Load Switch Evaluation Board

Product

EV5087-G-00B 0.5-5.5V, 7A Low RDSON Load Switch Evaluation Board

Share

pMPS EV5087-G-00B — Low RDSON Load Switch, 0.5-5.5V input, 7 A output./p

[email protected]

MPS Power Management Evaluation Boards

Product Details
Download

EV5087-G-00B 0.5-5.5V, 7A Low RDSON Load Switch Evaluation Board

The MPS EV5087-G-00B is an evaluation board built around the MP5087 for bench characterisation of the device in its intended topology. It operates from a 0.5 V to 5.5 V input and is rated for 7 A.

The EV5087-G-00B is an evaluation board for the MP5087, a low RDSON load switch with current monitoring The MP5087 is a load switch, designed to provide 7A load protection covering 0.5V to 5.5V voltage range.

Key Specifications

Part Number	EV5087-G-00B
Board For	MP5087
Board Type	Evaluation / demonstration board
Function	Low RDSON Load Switch
Input Voltage	0.5 V to 5.5 V
Current Rating	7 A
Ordering Codes	EV5087-G-00B

Features

Output Current Monitoring Accurate as High as 3%
Wide VIN Range: 0.5V to 5.5V
<1uA Shutdown Current
Integrated 10mΩ Low RDSON FET
Typical 7A Load Current Range
Push-pull PG Indicator
Adjustable Start Up Slew Rate
Output Discharge Function
<200ns Short-Circuit Response Protection
Thermal Protection

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.