EV5408-U-00A 6-36V, 6A Dual USB Charging Port Power Converter Evaluation Board QFN26
EV5408-U-00A 6-36V, 6A Dual USB Charging Port Power Converter Evaluation Board QFN26

EV5408-U-00A 6-36V, 6A Dual USB Charging Port Power Converter Evaluation Board QFN26

Share
pMPS EV5408-U-00A — Dual USB Charging Port Power Converter, 6-36V input, 6 A output, QFN26./p
    • Product Details
    • Download

    EV5408-U-00A 6-36V, 6A Dual USB Charging Port Power Converter Evaluation Board QFN26

    The MPS EV5408-U-00A is an evaluation board built around the MP5408 for bench characterisation of the device in its intended topology. It operates from a 6 V to 36 V input and is rated for 6 A. The board carries the device in its QFN26 package.

    The MP5408 integrates a monolithic step-down switch-mode converter with two USB current- limit switches and charging port identification circuitry for each port.

    Key Specifications

    Part NumberEV5408-U-00A
    Board ForMP5408
    Board TypeEvaluation / demonstration board
    FunctionDual USB Charging Port Power Converter
    Input Voltage6 V to 36 V
    Current Rating6 A
    PackageQFN26
    Ordering CodesEV5408-U-00A

    Features

    • Wide 6V to 36V Operating Input-Voltage Range
    • Selectable Output Voltage: 5.1V, 5.17V and 5.3V
    • 90mV Line Drop Compensation
    • Accurate USB1/USB2 Output-Current Limit
    • 18mΩ/15mΩ Low RDS(ON) Internal Buck Power MOSFETs
    • 13mΩ/13mΩ Low RDS(ON) Internal USB1/USB2 Power MOSFETs
    • Load Shedding versus Temperature
    • Hiccup Current Limit for both Buck and USB
    • Supports DCP schemes for BC1.2, Divider Mode, and 1.2V/1.2V Mode
    • Supports USB TYPE-C 5V@3A Mode

    Evaluation Board

    EV5408-U-00A evaluation board
    EV5408-U-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV5408-U-00A support?
    6 V to 36 V. The rated output is 6 A.
    Which package and ordering codes apply to the EV5408-U-00A?
    QFN26; order codes include EV5408-U-00A.
    What are the defining features of the EV5408-U-00A?
    Wide 6V to 36V Operating Input-Voltage Range Selectable Output Voltage: 5.1V, 5.17V and 5.3V

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message