EV6513L-J-00A 2.5-5.5V, 0.6A Full H-bridge Motor Driver Evaluation Board TSOT23

Product

EV6513L-J-00A 2.5-5.5V, 0.6A Full H-bridge Motor Driver Evaluation Board TSOT23

Share

pMPS EV6513L-J-00A — Full H-bridge Motor Driver Evaluation Board, 2.5-5.5V input, 0.6 A output, TSOT23./p

[email protected]

MPS TSOT23 Power Management Motor Evaluation Boards

Product Details
Download

EV6513L-J-00A 2.5-5.5V, 0.6A Full H-bridge Motor Driver Evaluation Board TSOT23

The MPS EV6513L-J-00A is an evaluation board built around the MP6513LGJ for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 5.5 V input and is rated for 0.6 A. The board carries the device in its TSOT23 package.

The EV6513L-J-00A is an evaluation board for the MP6513LGJ, Is a full-H-bridge motor driver used for driving reversible motors, which can drive one dc motor or one winding of a stepper motor or other loads.

Key Specifications

Part Number	EV6513L-J-00A
Board For	MP6513LGJ
Board Type	Evaluation / demonstration board
Function	Full H-bridge Motor Driver Evaluation Board
Input Voltage	2.5 V to 5.5 V
Current Rating	0.6 A
Package	TSOT23
Ordering Codes	EV6513L-J-00A

Features

Wide 2.5V to 5.5V Input Voltage Range
0.6A continuous driver current
Full-H-bridge motor drive
OCP, OVP, and OTP

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.