EV6519-Q-00A 2.5-28V, 5A H-Bridge Current Regulator Evaluation Board QFN-19

Product

EV6519-Q-00A 2.5-28V, 5A H-Bridge Current Regulator Evaluation Board QFN-19

Share

pMPS EV6519-Q-00A — H-Bridge Current Regulator Evaluation Board, 2.5-28V input, 5 A output, QFN-19./p

[email protected]

MPS QFN-19 Power Management Evaluation Boards

Product Details
Download

EV6519-Q-00A 2.5-28V, 5A H-Bridge Current Regulator Evaluation Board QFN-19

The MPS EV6519-Q-00A is an evaluation board built around the MP6519 for bench characterisation of the device in its intended topology. It operates from a 2.5 V to 28 V input and is rated for 5 A. The board carries the device in its QFN-19 package.

The EV6519-Q-00A is an evaluation board for the MP6519, a monolithic, step-down, current- source driver.

Key Specifications

Part Number	EV6519-Q-00A
Board For	MP6519
Board Type	Evaluation / demonstration board
Function	H-Bridge Current Regulator Evaluation Board
Input Voltage	2.5 V to 28 V
Current Rating	5 A
Interface	PWM
Package	QFN-19
Ordering Codes	EV6519-Q-00A

Features

Wide 2.5V to 28V Input Voltage Range
Up to 5A Output Peak Current
±2% Accuracy at Full-Scale Reference
65mΩ RDS(ON) for Each MOSFET of H-Bridge
30kHz to 300kHz Programmable Switching Frequency
20k-100kHz PWM Input for Current Regulation
Programmable Full-Scale Current
Selectable Current Polarity Mode
Open-Load Protection, OCP, OTP, OVP

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.