Welcome to our company!
EV6600-R-00A 4.5-35V, 1.5A Bipolar Stepper Motor Driver Evaluation Board NOT RECOMMENDED FOR NEW
Share
pMPS EV6600-R-00A — Bipolar Stepper Motor Driver Evaluation Board NOT RECOMMENDED FOR NEW, 4.5-35V input, 1.5 A output./p
- Product Details
- Download
EV6600-R-00A 4.5-35V, 1.5A Bipolar Stepper Motor Driver Evaluation Board NOT RECOMMENDED FOR NEW
The MPS EV6600-R-00A is an evaluation board built around the MP6600GR for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 35 V input and is rated for 1.5 A.
The EV6600-R-00A is an evaluation board for the MP6600GR, a stepper motor driver with a built-in micro stepping translator.
Key Specifications
| Part Number | EV6600-R-00A |
| Board For | MP6600GR |
| Board Type | Evaluation / demonstration board |
| Function | Bipolar Stepper Motor Driver Evaluation Board NOT RECOMMENDED FOR NEW |
| Input Voltage | 4.5 V to 35 V |
| Current Rating | 1.5 A |
| Lifecycle | NRFND |
| Ordering Codes | EV6600-R-00A |
Features
- Wide 4.5V to 35V Input Voltage Range
- Up to 1.5A Programmable Output Current
- Full-, Half-, Quarter-, and Eighth- Step Mode
- Automatic Decay Mode
- OCP, OVP, OTP
- Fault Indication Output
Evaluation Board
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EV6600-R-00A support?
4.5 V to 35 V. The rated output is 1.5 A.
What are the defining features of the EV6600-R-00A?
Wide 4.5V to 35V Input Voltage Range Up to 1.5A Programmable Output Current
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
