EV7752-F-00A 5-18V Indutorless 2X15W Stereo BTL Fix Frequency Class D Audio Amplifier Evaluation Board TSSOP28
EV7752-F-00A 5-18V Indutorless 2X15W Stereo BTL Fix Frequency Class D Audio Amplifier Evaluation Board TSSOP28

EV7752-F-00A 5-18V Indutorless 2X15W Stereo BTL Fix Frequency Class D Audio Amplifier Evaluation Board TSSOP28

Share
pMPS EV7752-F-00A — Indutorless 2X15W Stereo BTL Fix Frequency Class D Audio Amplifier, 5-18V input, TSSOP28./p
    • Product Details
    • Download

    EV7752-F-00A 5-18V Indutorless 2X15W Stereo BTL Fix Frequency Class D Audio Amplifier Evaluation Board TSSOP28

    The MPS EV7752-F-00A is an evaluation board built around the MP7752 for bench characterisation of the device in its intended topology. It operates from a 5 V to 18 V input. The board carries the device in its TSSOP28 package.

    The EV7752-F-00A is the evaluation board for the MP7752, a 15W stereo BTL Fix Freuquency Inductorless Class D Audio Amplifier.

    Key Specifications

    Part NumberEV7752-F-00A
    Board ForMP7752
    Board TypeEvaluation / demonstration board
    FunctionIndutorless 2X15W Stereo BTL Fix Frequency Class D Audio Amplifier
    Input Voltage5 V to 18 V
    Output Power15 W
    Peak Efficiency90%
    PackageTSSOP28
    Ordering CodesEV7752-F-00A

    Features

    • 15W Stereo BTL Output at VDD = 16V into 8Ω loads
    • 9.5W Stereo BTL Output at VDD = 12V into 8Ω loads
    • 90% Efficiency at 9.5W x 2 and VDD=12V with 8Ω load, Stereo
    • Low Noise (115μV Typical)
    • 5V to 18V Operation from a Single Supply

    Evaluation Board

    EV7752-F-00A evaluation board
    EV7752-F-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV7752-F-00A support?
    5 V to 18 V.
    Which package and ordering codes apply to the EV7752-F-00A?
    TSSOP28; order codes include EV7752-F-00A.
    What are the defining features of the EV7752-F-00A?
    15W Stereo BTL Output at VDD = 16V into 8Ω loads 9.5W Stereo BTL Output at VDD = 12V into 8Ω loads

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products