EV8760D-L-00A 8-18V, 6A Step-Down Converter Evaluation Board QFN3
EV8760D-L-00A 8-18V, 6A Step-Down Converter Evaluation Board QFN3

EV8760D-L-00A 8-18V, 6A Step-Down Converter Evaluation Board QFN3

Share
pMPS EV8760D-L-00A — Step-Down Converter Evaluation Board, 8-18V input, 6 A output, QFN3./p
    • Product Details
    • Download

    EV8760D-L-00A 8-18V, 6A Step-Down Converter Evaluation Board QFN3

    The MPS EV8760D-L-00A is an evaluation board built around the MP8760DGL for bench characterisation of the device in its intended topology. It operates from a 8 V to 18 V input and is rated for 6 A. The board carries the device in its QFN3 package.

    The EV8760D-L-00A is an evaluation board for the MP8760DGL, a high-efficiency, monolithic, synchronous, step-down converter with output discharge function.

    Key Specifications

    Part NumberEV8760D-L-00A
    Board ForMP8760DGL
    Board TypeEvaluation / demonstration board
    FunctionStep-Down Converter Evaluation Board
    Input Voltage8 V to 18 V
    Current Rating6 A
    PackageQFN3
    Ordering CodesEV8760D-L-00A

    Features

    • Wide 8V-to-18V Operating Input Range
    • 6A Output Current
    • Low RDS(ON) Internal Power MOSFETs
    • Proprietary, Switching-Loss-Reduction Technique
    • Adaptive COT for Ultrafast Transient Response
    • Programmable Soft Start and Shutdown Time
    • Pre-Bias Start-Up
    • Programmable Switching Frequency from 200kHz to 1MHz
    • Non-Latch OCP, OVP, and Thermal Shutdown
    • Output Adjustable from 0.611V to 13V

    Evaluation Board

    EV8760D-L-00A evaluation board
    EV8760D-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8760D-L-00A support?
    8 V to 18 V. The rated output is 6 A.
    Which package and ordering codes apply to the EV8760D-L-00A?
    QFN3; order codes include EV8760D-L-00A.
    What are the defining features of the EV8760D-L-00A?
    Wide 8V-to-18V Operating Input Range 6A Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products