EV8764GLE-L-00A 4.5-18V, 12A Synchronous Step-down Converter Evaluation Board QFN3
EV8764GLE-L-00A 4.5-18V, 12A Synchronous Step-down Converter Evaluation Board QFN3

EV8764GLE-L-00A 4.5-18V, 12A Synchronous Step-down Converter Evaluation Board QFN3

Share
pMPS EV8764GLE-L-00A — Synchronous Step-down Converter Evaluation Board, 4.5-18V input, 12 A output, QFN3./p
    • Product Details
    • Download

    EV8764GLE-L-00A 4.5-18V, 12A Synchronous Step-down Converter Evaluation Board QFN3

    The MPS EV8764GLE-L-00A is an evaluation board built around the MP8764GLE for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 18 V input and is rated for 12 A. The board carries the device in its QFN3 package.

    The EV8764GLE-L-00A is an evaluation board for the MP8764GLE, a high efficiency monolithic synchronous step-down converter.

    Key Specifications

    Part NumberEV8764GLE-L-00A
    Board ForMP8764GLE
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-down Converter Evaluation Board
    Input Voltage4.5 V to 18 V
    Current Rating12 A
    PackageQFN3
    Ordering CodesEV8764GLE-L-00A

    Features

    • Wide 4.5V to 18V Operating Input Range
    • 12A Output Current
    • Low RDS(ON) Internal Power MOSFETs
    • Proprietary Switching Loss Reduction Technique
    • Adaptive COT for Ultrafast Transient Response
    • Programmable Soft Start Time
    • Pre-Bias Start up
    • Programmable Switching Frequency from 200kHz to 1MHz
    • Latch-off SCP, and non-latch OVP Protection and Thermal Shutdown
    • Output Adjustable from 0.611V to 13V

    Evaluation Board

    EV8764GLE-L-00A evaluation board
    EV8764GLE-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8764GLE-L-00A support?
    4.5 V to 18 V. The rated output is 12 A.
    Which package and ordering codes apply to the EV8764GLE-L-00A?
    QFN3; order codes include EV8764GLE-L-00A.
    What are the defining features of the EV8764GLE-L-00A?
    Wide 4.5V to 18V Operating Input Range 12A Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products