EV8795-LE-00A 2.7-16V, 15A Step-Down Converter Evaluation Board QFN-21

EV8795-LE-00A 2.7-16V, 15A Step-Down Converter Evaluation Board QFN-21

The EV8795-LE-00A is an evaluation board designed to demonstrate the capabilities of the MP8795, a high-efficiency, monolithic, synchronous, step-down converter.

Key Specifications

Features

• Wide Input Voltage (VIN) Range: o 2.7V to 16V VIN Range with External 3.3V VCC Bias o 4V to 16V VIN Range with Internal VCC Bias or External 3.3V VCC Bias
• Up to 15A Continuous Output Current (IOUT)
• Differential VOUT Remote Sense
• Configurable Accurate Current Limit
• Low RDS(ON), Integrated Power MOSFETs
• Proprietary Switching Loss Reduction
• Adaptive Constant-On-Time (COT) Control for Fast Transient Response
• Stable with Zero-ESR Output Capacitors
• Reference Voltage (VREF): o 0.5% VREF from 0°C to 70°C Junction Temperature (TJ) o 1% VREF from -40°C to +125°C TJ
• Selectable Pulse-Skip Mode (PSM) and Forced Continuous Conduction Mode (FCCM)

Design Notes

• The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
• Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
• Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
• Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

Common Questions