EV8846-Q-00A 4.5-8V, 6A High Efficient Synchronous Step-Down Converter Evaluation Board QFN15
EV8846-Q-00A 4.5-8V, 6A High Efficient Synchronous Step-Down Converter Evaluation Board QFN15

EV8846-Q-00A 4.5-8V, 6A High Efficient Synchronous Step-Down Converter Evaluation Board QFN15

Share
pMPS EV8846-Q-00A — High Efficient Synchronous Step-Down Converter, 4.5-8V input, 6 A output, QFN15./p
    • Product Details
    • Download

    EV8846-Q-00A 4.5-8V, 6A High Efficient Synchronous Step-Down Converter Evaluation Board QFN15

    The MPS EV8846-Q-00A is an evaluation board built around the MP8846 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 8 V input, is rated for 6 A and switches at 600 kHz. The board carries the device in its QFN15 package.

    The EV8846-Q-00A is used for demonstrating the performance of MPS's MP8846.

    Key Specifications

    Part NumberEV8846-Q-00A
    Board ForMP8846
    Board TypeEvaluation / demonstration board
    FunctionHigh Efficient Synchronous Step-Down Converter
    Input Voltage4.5 V to 8 V
    Current Rating6 A
    Switching Frequency600 kHz
    InterfaceI²C
    PackageQFN15
    Ordering CodesEV8846-Q-00A

    Features

    • Wide 4.5V-to-8V Operation Input Range
    • 45mΩ/18mΩ Low RDS(ON) Internal Power MOSFETs
    • 1% VOUT Accuracy
    • I2C Programmable Reference Range from 0.6V to 1.87V in 10mV Steps with Slew Rate Control
    • I2C Selectable Switching Frequency. Default 600kHz Switching Frequency.
    • Programmable Output Voltage
    • Power Saving Mode, OTP and OCP Via I2C
    • Power Good Indication
    • 1 bit I2C Address Set pin
    • OCP Protection and Hiccup

    Evaluation Board

    EV8846-Q-00A evaluation board
    EV8846-Q-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8846-Q-00A support?
    4.5 V to 8 V. The rated output is 6 A.
    Which package and ordering codes apply to the EV8846-Q-00A?
    QFN15; order codes include EV8846-Q-00A.
    What are the defining features of the EV8846-Q-00A?
    Wide 4.5V-to-8V Operation Input Range 45mΩ/18mΩ Low RDS(ON) Internal Power MOSFETs

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message