EV8848-D-00A 2.7-6V, 6A High Efficient Synchronous Step-Down Switcher Evaluation Board

Product

EV8848-D-00A 2.7-6V, 6A High Efficient Synchronous Step-Down Switcher Evaluation Board

Share

pMPS EV8848-D-00A — High Efficient Synchronous Step-Down Switcher, 2.7-6V input, 6 A output./p

[email protected]

MPS Step-Down Power Management Evaluation Boards

Product Details
Download

EV8848-D-00A 2.7-6V, 6A High Efficient Synchronous Step-Down Switcher Evaluation Board

The MPS EV8848-D-00A is an evaluation board built around the MP8848 for bench characterisation of the device in its intended topology. It operates from a 2.7 V to 6 V input and is rated for 6 A.

The MP8848 is a highly integrated and high frequency synchronous step-down switcher with I2C control interface.

Key Specifications

Part Number	EV8848-D-00A
Board For	MP8848
Board Type	Evaluation / demonstration board
Function	High Efficient Synchronous Step-Down Switcher
Input Voltage	2.7 V to 6 V
Current Rating	6 A
Interface	I²C
Lifecycle	NRFND
Ordering Codes	EV8848-D-00A

Features

2.7V to 6V Input Voltage Range
Up to 6A Load Current
Internal 32mΩ High-Side, 15mΩ Low-Side Power MOSFETs
I2C Compatible Interface up to 3.4Mbps
I2C Programmable Output Range from 0.6V to 1.235V in 5mV Steps
Factory Adjustable Switching Frequency from 0.85MHz to 2.2MHz
Power Saving Mode Selectable via I2C
Internal 1ms Soft-Start
Power Good Indicator
Current Overload and Thermal Shutdown Protection

Evaluation Board

Design Notes

The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.