Welcome to our company!
EV8862-Q-00A 2.8-22V, 2A Integrated Buck-Boost Converter Evaluation Board QFN-16
Share
pMPS EV8862-Q-00A — Integrated Buck-Boost Converter, 2.8-22V input, 2 A output, QFN-16./p
- Product Details
- Download
EV8862-Q-00A 2.8-22V, 2A Integrated Buck-Boost Converter Evaluation Board QFN-16
The MPS EV8862-Q-00A is an evaluation board built around the MP8862 for bench characterisation of the device in its intended topology. It operates from a 2.8 V to 22 V input, is rated for 2 A and switches at 500 kHz. The board carries the device in its QFN-16 package.
The EV8862-Q-00A is an evaluation board for MP8862, which is a synchronous, 4-switch, integrated buck-boost converter capable of regulating the output voltage from a 2.8V to 22V wide input voltage range with high efficiency.
Key Specifications
| Part Number | EV8862-Q-00A |
| Board For | MP8862 |
| Board Type | Evaluation / demonstration board |
| Function | Integrated Buck-Boost Converter |
| Input Voltage | 2.8 V to 22 V |
| Current Rating | 2 A |
| Switching Frequency | 500 kHz |
| Interface | I²C |
| Package | QFN-16 |
| Ordering Codes | EV8862-Q-00A |
Features
- Wide 2.8V to 22V Operating Input Voltage Range
- 1V (1) to 20.47V Output Voltage Range (5V Default) with 10mV Resolution through I2C
- 2A Output Current or 4A Input Current
- Four Low RDS(ON) Internal Buck Power MOSFETs
- Adjustable Accurate CC Output Current Limit with Internal Sensing MOSFET via I2C
- 500kHz Switching Frequency
- Output Over-Voltage Protection (OVP) Hiccup
- Output Short-Circuit Protection (SCP) with Hiccup
- Over-Temperature Warning and Shutdown
- I2C Interface with ALT Pin
Design Notes
- The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
- Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
- Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
- Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.
Common Questions
What input voltage does the EV8862-Q-00A support?
2.8 V to 22 V. The rated output is 2 A.
Which package and ordering codes apply to the EV8862-Q-00A?
QFN-16; order codes include EV8862-Q-00A.
What are the defining features of the EV8862-Q-00A?
Wide 2.8V to 22V Operating Input Voltage Range 1V (1) to 20.47V Output Voltage Range (5V Default) with 10mV Resolution through I2C
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
