EV8867-LE-00A 4.5-17V, 8A Synchronous Step-Down Converter Evaluation Board QFN-14
EV8867-LE-00A 4.5-17V, 8A Synchronous Step-Down Converter Evaluation Board QFN-14

EV8867-LE-00A 4.5-17V, 8A Synchronous Step-Down Converter Evaluation Board QFN-14

Share
pMPS EV8867-LE-00A — Synchronous Step-Down Converter, 4.5-17V input, 8 A output, QFN-14./p
    • Product Details
    • Download

    EV8867-LE-00A 4.5-17V, 8A Synchronous Step-Down Converter Evaluation Board QFN-14

    The MPS EV8867-LE-00A is an evaluation board built around the MP8867 for bench characterisation of the device in its intended topology. It operates from a 4.5 V to 17 V input and is rated for 8 A. The board carries the device in its QFN-14 package.

    The EV8867-LE-00A is used for demonstrating the performance of MPS's MP8867.

    Key Specifications

    Part NumberEV8867-LE-00A
    Board ForMP8867
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter
    Input Voltage4.5 V to 17 V
    Current Rating8 A
    InterfaceI²C
    PackageQFN-14
    Ordering CodesEV8867-LE-00A

    Features

    • Wide 4.5V-to-17V Operating Input Range
    • 1% Internal Reference Accuracy
    • I2C Programmable Reference Output Voltage
    • Range from 0.6V to 1.87V in 10mV Steps with Slew Rate Control
    • I2C Selectable Switching Frequency.
    • 200kHz-2MHz Synchronized External Clock
    • OTP, OCP Hiccup Indication Via I2C
    • Selectable PSM and Fs Through I2C
    • Programmable Soft Start Time
    • Open-Drain Power Good Indicator

    Evaluation Board

    EV8867-LE-00A evaluation board
    EV8867-LE-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8867-LE-00A support?
    4.5 V to 17 V. The rated output is 8 A.
    Which package and ordering codes apply to the EV8867-LE-00A?
    QFN-14; order codes include EV8867-LE-00A.
    What are the defining features of the EV8867-LE-00A?
    Wide 4.5V-to-17V Operating Input Range 1% Internal Reference Accuracy

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products