EV8869S-L-00A 2.85-18V, 12A Synchronous Step-Down Converter Evaluation Board QFN-14
EV8869S-L-00A 2.85-18V, 12A Synchronous Step-Down Converter Evaluation Board QFN-14

EV8869S-L-00A 2.85-18V, 12A Synchronous Step-Down Converter Evaluation Board QFN-14

Share
pMPS EV8869S-L-00A — Synchronous Step-Down Converter, 2.85-18V input, 12 A output, QFN-14./p
    • Product Details
    • Download

    EV8869S-L-00A 2.85-18V, 12A Synchronous Step-Down Converter Evaluation Board QFN-14

    The MPS EV8869S-L-00A is an evaluation board built around the MP8869S for bench characterisation of the device in its intended topology. It operates from a 2.85 V to 18 V input and is rated for 12 A. The board carries the device in its QFN-14 package.

    The EV8869S-L-00A is used for demonstrating the performance of MPS's MP8869S.

    Key Specifications

    Part NumberEV8869S-L-00A
    Board ForMP8869S
    Board TypeEvaluation / demonstration board
    FunctionSynchronous Step-Down Converter
    Input Voltage2.85 V to 18 V
    Current Rating12 A
    InterfaceI²C
    PackageQFN-14
    Ordering CodesEV8869S-L-00A

    Features

    • Vout Adjustable up to 5.5V using FB pin
    • Wide 2.85V-to-18V Operating Input Range
    • 12A Continuous/15A Peak Output Current
    • 1% Internal Reference Accuracy
    • I2C Programmable Output Range from 0.6V to 1.108V in 4mV Steps with Slew Rate Control
    • 5% Accuracy Output Voltage and Output Current Read Back Via I2C
    • Selectable PFM/PWM Mode and Adjustable Frequency & Current Limit Through I2C
    • 4 Different I2C Address Selectable
    • External Soft Start
    • Open Drain Power Good Indication

    Evaluation Board

    EV8869S-L-00A evaluation board
    EV8869S-L-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV8869S-L-00A support?
    2.85 V to 18 V. The rated output is 12 A.
    Which package and ordering codes apply to the EV8869S-L-00A?
    QFN-14; order codes include EV8869S-L-00A.
    What are the defining features of the EV8869S-L-00A?
    Vout Adjustable up to 5.5V using FB pin Wide 2.85V-to-18V Operating Input Range

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products