EV9151-D-00A 5-20V 20V, 4A 800kHz Synchronous Step-down Converter EV Board Evaluation Board QFN2
EV9151-D-00A 5-20V 20V, 4A 800kHz Synchronous Step-down Converter EV Board Evaluation Board QFN2

EV9151-D-00A 5-20V 20V, 4A 800kHz Synchronous Step-down Converter EV Board Evaluation Board QFN2

Share
pMPS EV9151-D-00A — 20V, 4A 800kHz Synchronous Step-down Converter EV Board, 5-20V input, 4 A output, QFN2./p
    • Product Details
    • Download

    EV9151-D-00A 5-20V 20V, 4A 800kHz Synchronous Step-down Converter EV Board Evaluation Board QFN2

    The MPS EV9151-D-00A is an evaluation board built around the MP9151 for bench characterisation of the device in its intended topology. It operates from a 5 V to 20 V input, is rated for 4 A and switches at 800 kHz. The board carries the device in its QFN2 package.

    The EV9151-D-00A is for demonstrating MPS's MP9151, a high-frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs.

    Key Specifications

    Part NumberEV9151-D-00A
    Board ForMP9151
    Board TypeEvaluation / demonstration board
    Function20V, 4A 800kHz Synchronous Step-down Converter EV Board
    Input Voltage5 V to 20 V
    Current Rating4 A
    Switching Frequency800 kHz
    PackageQFN2
    Ordering CodesEV9151-D-00A

    Features

    • Wide 5V to 20V Operating Input Range
    • 4A Output Current
    • Low RDS(ON) Internal Power MOSFETs
    • Programmable Switching Frequency from 300kHz to 1.6MHz
    • EN ON/OFF Control
    • Power Good Indicator
    • External Soft Start
    • OCP and Thermal Shutdown
    • Available in 14-pin QFN2x3 Package

    Evaluation Board

    EV9151-D-00A evaluation board
    EV9151-D-00A evaluation board, as published by MPS.

    Design Notes

    • The board ships in a default configuration; check the jumper and resistor options against the user guide before applying power.
    • Respect the input terminal rating — most faults on evaluation boards come from an supply above the marked limit.
    • Test points on the switching node and output are for a short-ground probe, not for a long oscilloscope lead.
    • Where a GUI is supported, connect the dongle before power-up so the device enumerates on the I²C bus.

    Common Questions

    What input voltage does the EV9151-D-00A support?
    5 V to 20 V. The rated output is 4 A.
    Which package and ordering codes apply to the EV9151-D-00A?
    QFN2; order codes include EV9151-D-00A.
    What are the defining features of the EV9151-D-00A?
    Wide 5V to 20V Operating Input Range 4A Output Current

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products